• ICES-001 Issue 4, June 2006 Industrial, Scientific and Medical (ISM) Radio Frequency Generators.
• ICES-002 Issue 6, Updated February 2017 March Vehicles, Boats and Other Devices Propelled by an Internal Combustion Engine, Electrical Means or Both.
• ICES-003 Issue 6, June 2013 Information Technology Equipment (Including Digital Apparatus) Limits and Methods of Measurement.
• ICES-004 Issue 4, June 2013 Alternating Current High Voltage Power Systems.
• ICES-005 Issue 4, December 2015 Radio Frequency Lighting Devices (RFLDs).
• ICES-006 Issue 2, June 2009, Updated November 2014 AC Wire Carrier Current Devices (Unintentional Radiators).
• ICES-008 Issue1, June 2015 Cable Distribution Networks
• RSS-Gen General Requirements and Information for the Certification of Radiocommunication Equipment Issue 4, November 2014.
• RSS-102 Radio Frequency Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) Issue 5, March 2015 Updated March 2015.
• RSS-310 Low-power Licence-exempt Radiocommunication Devices (All Frequency Bands): Category II Equipment Issue 4, July 2015.
• CAN/CSA-CISPR 16-1-1:15 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus (Adopted IEC CISPR 16-1-1:2010, edition 3:2010 consolidated wit
• CAN/CSA-CISPR 22-10 (R2014) - Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (Adopted IEC CISPR 22:2008, sixth edition, 2008-09, with Canadian deviations) | Appareils de traitement de l'information
• CSA-CEI/IEC CISPR 22:2002-Information technology equipment-Radio disturbance characteristics-Limits and methods of measurement.
• CAN/CSA-IEC 61000-4-2:12 (R2017) - Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test (Adopted IEC 61000-4- 2:2008, second edition, 2008-12) | Compatibilit lectromagn tique (CEM).
• CAN/CSA-CEI/IEC 61000-4-3-07 (R2015) - Electromagnetic Compatibility (EMC) - Part 4-3: Testing and Measurement Techniques - Radiated, Radio-Frequency, Electromagnetic Field Immunity Test (Adopted CEI/IEC 61000-4-3:2006, third edition, 2006-02) | Compatibi.
• CAN/CSA-IEC 61000-4-4:16 - Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test (Adopted IEC 61000-4-4:2012, third edition, 2012-04) | Compatibilit lectromagn tique (CEM) - Pa.
• CAN/CSA-IEC 61000-4-5-08 (R2017) - Electromagnetic Compatibility (EMC) - Part 4-5: Testing and Measurement Techniques - Surge Immunity Test (Adopted IEC 61000-4-5:2005, second edition, 2005-11) | Compatibilit lectromagn tique (CEM) - Partie 4-5: Techniq.
• CAN/CSA-IEC 61000-4-6:15 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radiofrequency fields (Adopted IEC 61000-4-6:2013, fourth edition, 2013-10) | Compatibilit lec.
• CAN/CSA-IEC 61000-4-8:12 (R2017) - Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test (Adopted IEC 61000-4-8:2009, second edition, 2009-09) | Compatibilit lectromagn tique (C.
• CAN/CSA-CEI/IEC 61000-4-9-02 (R2015) - Electromagnetic Compatibility (EMC) - Part 4-9: Testing and Measurement Techniques - Pulse Magnetic Field Immunity Test (Adopted CEI/IEC 61000-4-9:1993 + A1:2000, edition 1.1, 2001-03) | Compatibilit lectromagn tiq
• CAN/CSA-CEI/IEC 61000-4-11-05 (R2014) - Electromagnetic Compatibility (EMC) - Part 4-11: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests (Adopted CEI/IEC 61000-4-11:2004, second edition, 2004-03
• CAN/CSA-IEC 61000-4-12:13 (R2017) - Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test (Adopted IEC 61000-4-12:2006, second edition, 2006-09) | Compatibilit lectromagn tique (CEM) - Partie 4-12:
• CAN/CSA-IEC 61000-4-16:17 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (Adopted IEC 61000-4-16:2015, second edition,
• CAN/CSA-CEI/IEC 61000-4-17-02 (R2016) - Electromagnetic Compatibility (EMC) - Part 4-17: Testing and Measurement Techniques - Ripple on d.c. Input Power Port Immunity Test (Adopted CEI/IEC 61000-4-17:1999, first edition, 1999-06, including Amendment 1:200
• CAN/CSA-CEI/IEC 61000-4-27-01 (R2015) - Electromagnetic Compatibility (EMC) - Part 4-27: Testing and Measurement Techniques - Unbalance, Immunity Test (Adopted CEI/IEC 61000-4-27:2000, first edition, 2000-08) | Compatibilit lectromagn tique (CEM) - Part
• CAN/CSA-CEI/IEC 61000-4-28-01 (R2017) - Electromagnetic Compatibility (EMC) - Part 4-28: Testing and Measurement Techniques - Variation of Power Frequency, Immunity Test (Adopted CEI/IEC 61000-4-28:1999, first edition, 1999-11) | Compatibilit lectromagn

European Union

• DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast).
• BS EN 61000-4-3:2006+A2:2010 Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test.
• BS EN 61000-4-6:2014 Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields.
• BS EN 61000-4-7:2002+A1:2009 Electromagnetic compatibility (EMC). Testing and measurement techniques . General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto.
• BS EN 61000-4-8:2010 Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency magnetic field immunity test.
• BS EN 61000-4-9:2016 Electromagnetic compatibility (EMC). Testing and measurement techniques. Impulse magnetic field immunity test.
• BS EN 61000-4-23:2001 Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances.
• BS EN 61000-4-28:2000+A2:2009 Electromagnetic compatibility (EMC). Testing and measurement techniques. Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase.
• BS EN 60601-1-2:2015 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests.

International

• IEC 61000-1-2:2001 Electromagnetic compatibility (EMC) Part 1-2: General Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena.
• IEC 61000-3-2:2018/AMD2:2024 Electromagnetic compatibility (EMC) Part 3: Limits. Section 2: Limits for harmonic current emissions for electronic equipment (equipment input current less than 16 A per phase).
• IEC 61000-3-3:2013+A1:2017+A2:2021 Electromagnetic compatibility (EMC) Part 3-3: Limits Section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current less than or equal to 16 A.
• IEC 61000-3-5:2009 Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A.
• IEC 61000-3-11:2017 Electromagnetic compatibility (EMC) Part 3-11: Limits Limitation of voltage changes, voltage fluctuations, and flicker in public low-voltage supply systems Equipment with rated voltage current less than or equal to 75 A and subject to conditional connection.
• IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test.
• IEC 61000-4-3:2020 Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test.
• IEC 61000-4-4:2012 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test.
• IEC 61000-4-5:2014+AMD1:2017 Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test.
• IEC 61000-4-6:2023 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields.
• IEC 61000-4-8:2009 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test.
• IEC 61000-4-11:2020 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase.
• IEC TR 61000-4-38:2015 Electromagnetic compatibility (EMC) - Part 4-38: Testing and measurement techniques - Test, verification and calibration protocol for voltage fluctuation and flicker compliance test systems.
• IEC 60601-1:2024 SER Medical electrical equipment - ALL PARTS.

CISPR

• CISPR 11:2015 Industrial, scientific and medical equipment Radio frequency disturbance characteristics Limits and methods of measurement
• CISPR 15:2013 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment,
• CISPR 16-1-2:2014+AMD1:2017 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements.
• CISPR 16-1-3:2004+AMD1:2016+AMD2:2020 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power.
• CISPR 16-2-1:2014+AMD1:2017 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements.
• CISPR 16-2-2:2010 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power.
• CISPR 22:2008 Information technology equipment Radio disturbance characteristics Limits and methods of measurement (Replaced by CISPR 32:2015)
• CISPR 24:2010+A1:2015 Information technology equipment - Immunity characteristics - Limitsand methods of measurement (Withdrawn. Replaced by CISPR 35:2016).
• CISPR 32:2015 Electromagnetic compatibility of multimedia equipment - Emission requirements.
• CISPR 35:2016 Electromagnetic compatibility of multimedia equipment - Immunity requirements.

ESD

USA

• UL 1449:2014 Transient voltage surge suppressors.
• IEEE C62.38:1994 (R1999) IEEE guide on electrostatic discharge (ESD) ESD withstand capability evaluation methods (for electronic equipment subassemblies).
• ANSI C63.14:2014 American national standard dictionary for technologies of electromagnetic compatibility (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD) Dictionary of EMC/EMP/ESD terms and definitions.

Canada

• IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques Electrostatic discharge immunity test.

European Union

• EN 61340-5-1:2016 Protection of electronic devices from electrostatic phenomena General requirements.
• EN 61340-5-2:2001 Protection of electronic devices from electrostatic phenomena User guide.(Repaced by PD CLC/TR 61340-5-2:2008).
• PD CLC/TR 61340-5-2:2008 Electrostatics. Protection of electronic devices from electrostatic phenomena. User guide.

International

• IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques Electrostatic discharge immunity test.